Reference Guide

Total number of prefixes: 10
OS10#
Supported Releases 10.3.0E or later
show ip bgp peer-group
Displays information on BGP peers in a peer-group.
Syntax
show ip bgp peer-group peer-group-name
Parameters peer-group-name — (Optional) Enter the peer group name to view information about that peer-group only.
Default Not congured
Command Mode EXEC
Usage Information
• Peer-group — Displays the peer group name. Minimum time displays the time interval between BGP
advertisements.
• Administratively shut — Displays the peer group’s status if you do not enable the peer group. If you
enable the peer group, this line does not display.
•
BGP version — Displays the BGP version supported.
• For address family — Displays IPv4 unicast as the address family.
• BGP neighbor — Displays the name of the BGP neighbor.
• Number of peers — Displays the number of peers currently congured for this peer group.
• Peer-group members — Lists the IP addresses of the peers in the peer group. If the address is outbound
optimized, an * displays next to the IP address.
Example
OS10# show ip bgp peer-group bgppg
Peer-group bgppg, remote AS 103
BGP version 4
Minimum time between advertisement runs is 30 seconds
For address family: Unicast
BGP neighbor is bgppg, peer-group external
Update packing has 4_OCTET_AS support enabled
Example (Summary)
OS10# show ip bgp peer-group ebgp summary
BGP router identifier 32.1.1.1 local AS number 6
Neighbor AS MsgRcvd MsgSent Up/Down State/Pfx
17.1.1.2 7 7 6 00:01:54 5
Supported Releases 10.2.0E or later
show ip bgp summary
Displays the status of all BGP connections.
Syntax
show ip bgp summary
Parameters None
Default Not congured
Command Mode EXEC
Usage Information
• Neighbor—Displays the BGP neighbor address.
270 Layer 3