Reference Guide
Parameters value — Enter the authentication key value known both to the RADIUS client and server.
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command resets the value to the default.
Example
OS10(config)# radius-server key md5
Supported Releases 10.2.0E or later
radius-server retransmit
Congures the number of attempts to retry the RADIUS server.
Syntax
radius-server retransmit retries
Parameters retries — Enter the number of retry attempts (0 to 100).
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command resets the value to the default.
Example
OS10(config)# radius-server retransmit 50
Supported Releases 10.2.0E or later
radius-server timeout
Congures the timeout for RADIUS server retransmission.
Syntax
radius-server timeout number
Parameters number — Enter the time in seconds for retransmission (0 to 1000).
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command resets the value to the default.
Example
OS10(config)# radius-server timeout 360
Supported Releases 10.2.0E or later
show ip ssh
Displays the SSH server information.
Syntax
show ip ssh
Parameters None
Default Not congured
Command Mode EXEC
System management 395