Reference Guide

• password — (Optional) Enter a password string (up to 32 characters).
• role — (Optional) Enter sysadmin or netoperator (default).
Default Clear-text
Command Mode CONFIGURATION
Usage Information You can only use the encryption-type parameter with the password parameter. The no version of this
command deletes authentication for a user.
Example
OS10(config)# username smith password MD5 newuser sysadmin
Supported Releases 10.2.0E or later
Simple network management protocol
Network management stations use SNMP to retrieve or alter management data from network elements. Standard and private SNMP
management information bases (MIBs) are supported, including all get requests. A managed object is a datum of management
information. A MIB is a database that stores managed objects found in network elements. MIBs are hierarchically structured and use object
identiers to address managed objects. Managed objects are also known as object descriptors.
SNMP commands
SNMP traps: Enable SNMP notications to be sent to network management host devices.
snmp-server community
Congures a new community string access. The management station is a member of the same community as the SNMP agent.
Syntax
snmp-server community community-name {ro}
Parameters
• community-name — Enter a text string to act as an SNMP password (up to 20 characters).
• ro — Enter to set read-only permission.
Default Not congured
Command Mode CONFIGURATION
Usage Information The community-name parameter indexes this command. If you do not congure this command, you cannot
query SNMP data. The no version of this command removes access to a community.
Example
OS10(config)# snmp-server community public ro
Supported Releases 10.2.0E or later
snmp-server contact
Congures contact information for troubleshooting this SNMP node.
Syntax
snmp-server contact text
Parameters text — Enter an alphanumeric text string (up to 55 characters).
System management 397