Reference Guide

Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command deletes the SNMP server contact information.
Example
OS10(config)# snmp-server contact administrator
Supported Releases 10.2.0E or later
snmp-server location
Congures the location of the SNMP server.
Syntax
snmp-server location text
Parameters text — Enter an alphanumeric string (up to 55 characters).
Default United States
Command Mode CONFIGURATION
Usage Information The no version of this command removes the SNMP location.
Example
OS10(config)# snmp-server location datacenter10
Supported Releases 10.2.0E or later
OS10 image upgrade
The image download command simply downloads the software image — it does not install the software on your device. The image
install command installs the downloaded image to the standby partition.
The image upgrade command downloads, installs, changes the next boot partition, and reloads the new software image.
1 (Optional) Backup the current running conguration to the startup conguration in EXEC mode.
copy running-configuration startup-configuration
2 Backup the startup conguration in EXEC mode.
copy config://startup.xml config://<backup file name>
3 Download the new software image from dell.com/support and save the le in EXEC mode.
image download file-url
4 (Optional) View the current software download status in EXEC mode.
show image status
5 Install the 10.3.1E software image in EXEC mode.
image install image-url
6 (Optional) View the status of the current software install in EXEC mode.
show image status
7 Change the next boot partition to the standby partition in EXEC mode. Use the active parameter to set the next boot partition
from standby to active.
boot system standby
8 (Optional) Check whether the next boot partition has changed to standby in EXEC mode.
show boot detail
9 Reload the new software image in EXEC mode.
reload
398
System management