Reference Guide

Usage Information Use the show image status command to view the installation progress.
Example
OS10# image install ftp://10.206.28.174/PKGS_OS10-Enterprise-10.2.0E.190-
installer-x86_64.bin
Supported Releases 10.2.0E or later
image upgrade
Upgrades to software image.
Syntax
image upgrade file-url
Parameters
• file-url — Location of the image le:
• ftp://userid:passwd@hostip/filepath — Enter the path to upgrade from a remote FTP server.
• http[s]://hostip/filepath — Enter the path to upgrade from the remote HTTP or HTTPS
server.
• scp://userid:passwd@hostip/filepath — Enter the path to upgrade from a remote SCP le
system.
• sftp://userid:passwd@hostip/filepath — Enter the path to upgrade from a remote SFTP le
system.
• tftp://hostip/filepath— Enter the path to upgrade from a remote TFTP le system.
• image://filename — Enter the path to upgrade from a local le system.
• usb://filepath — Enter the path to upgrade from the USB le system.
Default Not congured
Command Mode EXEC
Usage Information This command prompts you to conrm Yes/No for the reboot operation, along with the possible loss of unsaved
changes that occurs at the end of the process. Use the show image status command to view the progress.
Example
OS10# image upgrade ftp://10.206.28.174/PKGS_OS10-Enterprise-10.2.0E.190-
installer-x86_64.bin.
Supported Releases 10.2.0E or later
show boot
Displays boot partition-related information.
Syntax
show boot [detail]
Parameters detail — (Optional) Enter to display detailed information.
Default Not congured
Command Mode EXEC
Usage Information Use the boot system command to set the boot partition for the next reboot.
Example
OS10# show boot
Current system image information:
===================================
Type Boot Type Active Standby Next-Boot
402 System management