Reference Guide
Parameters
• queue-len value — Enter the guaranteed size for this queue (0 to 8911). Defaults:
• 45 Kb (10G)/111 Kb (40G) if queue is priority ow control enabled
• 2 Kb (10G)/8 Kb (40G) if queue is lossy/link-level ow control
• If this is a priority ow-control queue, this conguration is invalid
• Only supported for POLICY-MAP-CLASS-MAP (pmap-c-queue) mode
• thresh-mode — (Optional) Buer threshold mode.
• dynamic thresh-alpha-value — (Optional) Enter the value indexes to calculate the shared threshold
to the enable dynamic shared buer threshold (0 to 10). Defaults:
• 0 = 1/128
• 1 = 1/64
• 2 = 1/32
• 3 = 1/16
• 4 = 1/8
• 5 = 1/4
• 6 = 1/2
• 7 = 1
• 8 = 2
• 9 = 4
• 10 = 8
• static thresh-value — (Optional) Enter the static shared buer threshold value (1 to 65535).
Default
Not congured
Command Mode POLICY-MAP-CLASS-MAP
Usage Information Use the queue-len value parameter to set the minimum guaranteed queue length for a queue. The no version
of this command returns the value to the default.
Example
OS10(config)# policy-map type network-qos nqGlobalpolicy1
OS10(conf-cmap-nqos)# class type network-qos nqclass1
OS10(conf-cmap-nqos-c)# pause buffer-size 45 pause-threshold 30 resume-
threshold 10
OS10(conf-cmap-nqos-c)# queue-limit 150
Example (queue)
OS10(config)# policy-map type queuing pmap1
OS10(config-pmap-queuing)# class cmap1
OS10(config-pmap-c-que)# queue-limit queue-len 100
OS10(config-pmap-c-que)# queue-limit thresh-mode static 50
Supported Releases 10.3.0E or later
queue qos-group
Congures a dot1p trac class to a queue.
Syntax
queue number [qos-group dot1p-values]
Parameters
• queue number — Enter the trac single value queue ID (0 to 7).
• qos-group dot1p-values — (Optional) Enter either single, comma-delimited, or a hyphenated range of
dot1p values (0 to 7).
506 Quality of service