Reference Guide

Usage Information The no version of this command disables L3 routing.
Example
OS10(conf-vlt-1)# peer-routing
Supported Releases 10.2.0E or later
peer-routing-timeout
Congures the delay after which peer routing is disabled when the peer is not available. This command is applicable for both IPv6 and IPv4.
Syntax
peer-routing-timeout value
Parameters value — Enter the timeout value in seconds, from 0 to 65535.
Default 0
Command Mode VLT-DOMAIN
Usage Information
Use this command to congure a timer to disable the peer-routing when the peer is not available. When the timer
expires, the software checks to see if the VLT peer is available. If the VLT peer is not available, peer-routing is
disabled on the peer. If you do not congure the timer, peer-routing is not disabled even when the peer is
unavailable.
Example
OS10(conf-vlt-1)# peer-routing-timeout 120
Supported Releases 10.3.0E or later
show spanning-tree virtual-interface
Displays details of STP information specic to VLT.
Syntax
show spanning-tree virtual-interface [detail]
Parameters detail — (Optional) Displays detailed output.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show spanning-tree virtual-interface
VFP(VirtualFabricPort) of RSTP 1 is Designated Forwarding
Edge port: No (default)
Link type: point-to-point (auto)
Boundary: No, Bpdu-filter: Disable, Bpdu-Guard: Disable, Shutdown-on-Bpdu-Guard-violation: No
Root-Guard: Disable, Loop-Guard: Disable
Bpdus (MRecords) Sent: 11, Received: 7
Interface Designated
Name PortID Prio Cost Sts Cost Bridge ID PortID
---------------------------------------------------------------------------------------------
VFP(VirtualFabricPort) 0.1 0 1 FWD 0 32768 0078.7614.6062 0.1
Example (detail)
OS10# show spanning-tree virtual-interface detail
Port 1 (VFP(VirtualFabricPort)) of RSTP 1 is designated Forwarding
Port path cost 1, Port priority 0, Port Identifier 0.1
Designated root priority: 32768, address: 00:78:76:14:60:62
Designated bridge priority: 32768, address: 00:78:76:14:60:62
Designated port ID: 0.1, designated path cost: 0
Number of transitions to forwarding state: 1
Edge port: No (default)
532 Virtual link trunking