Reference Guide

Security commands
aaa accounting
Enables AAA accounting.
Syntax
aaa accounting commands all {console | default} {start-stop | stop-only |
none} [logging] [group tacacs+]
Parameters
● commands all — Record all user-entered commands. This option is not supported for RADIUS
accounting.
● console — Record all user authentication and logins or all user-entered commands in OS10 sessions
on console connections.
● default — Record all user authentication and logins or all user-entered commands in OS10 sessions
on remote connections; for example, Telnet and SSH.
● start-stop — Send a start notice when a process begins, and a stop notice when the process
ends.
● stop-only — Send only a stop notice when a process ends.
● none — No accounting notices are sent.
● logging — Logs all accounting notices in syslog.
● group tacacs+ — Logs all accounting notices on the first reachable TACACS+ server.
Default AAA accounting is disabled.
Command Mode CONFIGURATION
Usage
Information
You can enable the recording of accounting events in both the syslog and on TACACS+ servers. The no
version of the command disables AAA accounting.
Example
OS10(config)# aaa accounting commands all console start-stop logging
group tacacs+
Supported
Releases
10.4.1.0 or later
aaa authentication login
Configures the AAA authentication method used for console, and SSH and Telnet logins.
Syntax
aaa authentication login {console | default} {local | group radius | group
tacacs+}
Parameters
● console — Configure authentication methods for console logins.
● default — Configure authentication methods for SSH and Telnet logins.
● local — Use the local username, password, and role entries configured with the username
password role command.
● group radius — Use the RADIUS servers configured with the radius-server host command.
● group tacacs+ — Use the TACACS+ servers configured with the tacacs-server host
command.
Default Local authentication
Command Mode CONFIGURATION
Usage
Information
The no version of this command removes all configured authentication methods and defaults to using
local authentication.
Example
OS10(config)# aaa authentication login default group radius local
OS10(config)# do show running-configuration aaa
System management 499