Reference Guide

View boot summary
OS10# show boot
Current system image information:
===================================
Type Boot Type Active Standby Next-Boot
-----------------------------------------------------------------------------------
Node-id 1 Flash Boot [A] 10.4.1.0X [B] 10.4.1.0X [A] active
Upgrade commands
boot system
Sets the boot partition to use during the next reboot.
Syntax
boot system {active | standby}
Parameters
● active — Reset the running partition as the next boot partition.
● standby — Set the standby partition as the next boot partition.
Default Active
Command Mode EXEC
Usage
Information
Use this command to configure the location of the OS10 image used to reload the software at boot
time. Use the show boot command to view the configured next boot image. This command is applied
immediately and does not require the commit command.
Example
OS10# boot system standby
Supported
Releases
10.2.0E or later
image cancel
Cancels an active image download.
Syntax
image cancel
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
This command attempts to cancel an active file download in progress.
Example
OS10# image cancel
Supported
Releases
10.2.0E or later
image copy
Copies the entire image in the active partition to the standby partition (mirror image).
Syntax
image copy active-to-standby
Parameters active-to-standby — Enter to copy the entire image in the active partition to the standby partition
(mirror image).
Default Not configured
System management 527