Reference Guide

ETS commands
ets mode on
Enables ETS on an interface.
Syntax
ets mode on
Parameter None
Default Disabled
Command Mode INTERFACE
Usage
Information
Enable ETS on all switch interfaces in SYSTEM-QOS mode or on an interface or interface range in
INTERFACE mode. The no version of this command disables ETS.
Example
OS10(config-sys-qos)# ets mode on
Supported
Releases
10.3.0E or later
Data center bridging eXchange
DCBX allows a switch to automatically discover and set up DCBX-enabled peers configured with compatible settings. In a
converged data center network, DCBX provides plug-and-play capability for server, storage, and networking devices in an
end-to-end solution.
DCBX uses LLDP to mediate the automatic negotiation and exchange of device settings, such as PFC and ETS. DCBX uses
LLDP TLVs to perform DCB parameter exchange:
● PFC configuration and application priority configuration
● ETS configuration and ETS recommendation
This sample DCBX topology shows two 40GbE ports on a switch that are configured as DCBX auto-upstream ports and used as
uplinks to top-of-rack (ToR) switches. The top-of-rack (ToR) switches are part of a fibre channel storage network.
Converged data center services
717