Concept Guide
Table Of Contents
- Dell EMC SmartFabric Services User Guide Release 1.0
- About this guide
- SFS fundamentals
- Setting up SFS
- Deploying and managing a fabric
- Access fabric setup options
- Update default fabric, switch names, and descriptions
- Create uplink for external network connectivity
- Breakout switch ports
- Configure jump host
- Update network configuration
- Onboard a server onto the fabric
- Edit default fabric settings
- Restore fabric configuration
- Manage network profiles
- Manage routing profiles
- Access fabric setup options
- SFS with VxRail
- SFS with PowerEdge MX
- SFS for Isilon/PowerScale back-end fabric
- SFS commands
- smartfabric l3fabric enable
- smartfabric vlti
- show logging smartfabric
- show smartfabric cluster
- show smartfabric cluster member
- show smartfabric configured-server
- show smartfabric configured-server configured-server-interface
- show smartfabric details
- show smartfabric discovered-server
- show smartfabric discovered-server discovered-server-interface
- show smartfabric networks
- show smartfabric nodes
- show smartfabric personality
- show smartfabric uplinks
- show smartfabric upgrade-status
- show smartfabric validation-errors
- show switch-operating-mode
- Appendix
![](/manual/dell/powerswitch-s4128f-on-s4128t-on/concept-guide-english/images/img-23.png)
7. Define a routing policy to associate with the uplink based on the external network connectivity setup.
● Static Route—A route policy template that contains a network prefix and the next hop IP address.
● eBGP—A routing policy template that contains BGP peer IP address and the remote AS number.
NOTE: You cannot associate a L3 Routed network with more than one uplink or server profile.
You can view or delete the routing profiles that are created as part of the uplink configuration from the Routing Profiles tab.
For more information, see Manage routing profiles.
Manage uplinks
You can manage the uplinks that are created in the fabric.
From the SmartFabric Services page, click Uplinks tab to view the list of the uplinks that are configured in the SFS.
Deploying and managing a fabric
25