Concept Guide

Upgrade Protocol : PUSH
Upgrade start time : 2021-02-12 01:51:29.261000
Status : SUCCESS
Nodes to Upgrade : SVC009F, SVC009A, 7H92Q03, SVC009C, 8PQXV23, 34HQXC2,
8PTXV23, D6RRNK2, BWGQXC2, 9KK1W23, 9J45W23, 8Q52W23
Reboot Sequence : 7H92Q03,SVC009C,9KK1W23,SVC009F,8Q52W23,8PTXV23,D6RRNK2,
BWGQXC2,SVC009A,34HQXC2,5WQQXC2,9J45W23,8PQXV23
Node Current Curent Status-Message
-Action -Status
---------------------------------------------------------------------------------
SVC009C DOWNLOAD SUCCESS Skipping ONIE update for the node SVC009C since
ONIE is already installed with latest firmware.
SVC009F DOWNLOAD SUCCESS Skipping ONIE update for the node SVC009F since
ONIE is already installed with latest firmware.
SVC009A DOWNLOAD SUCCESS Skipping ONIE update for the node SVC009A since
ONIE is already installed with latest firmware.
8Q52W23 DOWNLOAD SUCCESS Skipping ONIE update for the node 8Q52W23 since
ONIE is already installed with latest firmware.
34HQXC2 DOWNLOAD SUCCESS Skipping ONIE update for the node 34HQXC2 since
ONIE is already installed with latest firmware.
BWGQXC2 DOWNLOAD SUCCESS Skipping ONIE update for the node BWGQXC2 since
ONIE is already installed with latest firmware.
9J45W23 DOWNLOAD SUCCESS Skipping ONIE update for the node 9J45W23 since
ONIE is already installed with latest firmware.
7H92Q03 DOWNLOAD SUCCESS Skipping ONIE update for the node 7H92Q03 since
ONIE is already installed with latest firmware.
9KK1W23 DOWNLOAD SUCCESS Skipping ONIE update for the node 9KK1W23 since
ONIE is already installed with latest firmware.
8PQXV23 DOWNLOAD SUCCESS Skipping ONIE update for the node 8PQXV23 since
ONIE is already installed with latest firmware.
D6RRNK2 ONIE-INSTALL SUCCESS [Action: REBOOT] Successfully rebooted.
8PTXV23 DOWNLOAD SUCCESS Skipping ONIE update for the node 8PTXV23 since
ONIE is already installed with latest firmware.
Supported
Releases
10.5.2.1 or Later
show smartfabric validation-errors
Displays validation-error information of the topology. Information includes error category, subcategory, description,
recommended action, severity, timestamp, EEMI, problem, and recommendation for each error.
Syntax
show smartfabric validation-errors
Parameters None
Default None
Command Mode EXEC
Usage
Information
Use this command to view a list of topology validation errors with detailed description about each error.
This command can be run on any IOM deployed in the same cluster.
This command is supported both in Full Switch and SmartFabric modes.
Example
OS10# show smartfabric validation-errors
----------------------------------------------------------
ErrorKey : d77d0133-f8c8-4cd7-82b5-83266e5361eb-ISL-
[ICL-3_REVERSE]-NotFound-Issue
MessageID :
Description : Unable to validate the SmartFabric because
the VLTi cable for link ICL-3_REVERSE is not connected as per
fabric design 2xMX9116n_Fabric_Switching_Engines_in_same_chassis.
EEMI : NFAB0012
Category : FABRIC_ERROR
Subcategory : ISL_ERROR
Severity : SEVERITY_1
54 SFS commands