Connectivity Guide

Parameters
• vrf vrf-name — (Optional) Enter vrf then the name of the VRF to display IPv6 routes corresponding to
that VRF. If you do not specify this option, routes corresponding to the default VRF display.
• all—(Optional) Displays all routes including nonactive routes.
• bgp—(Optional) Displays BGP route information.
• connected—(Optional) Displays only the directly connected routes.
• static—(Optional) Displays all static routes.
• A::B/mask—(Optional) Enter the IPv6 destination address and mask.
• summary—(Optional) Displays the IPv6 route summary.
Default Not congured
Command Mode EXEC
Usage Information None
Example (All)
OS10# show ipv6 route all
Codes: C - connected
S - static
B - BGP, IN - internal BGP, EX - external BGP
O - OSPF,IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, > - non-active route
Gateway of last resort is not set
Destination Gateway Dist/Metric Last Change
---------------------------------------------------------
Example
(Connected)
OS10# show ipv6 route connected
Codes: C - connected
S - static
B - BGP, IN - internal BGP, EX - external BGP
O - OSPF,IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, > - non-active route
Gateway of last resort is not set
Destination Gateway Dist/Metric Last Change
------------------------------------------------------------------
C 2001:db86::/32 via 2001:db86:fff::1 ethernet1/1/1 0/0 00:03:24
Example (Summary)
OS10# show ipv6 route summary
Route Source Active Routes Non-Active Routes
Ospf 0 0
Bgp 0 0
Connected 0 0
Static 0 0
Ospf Inter-area 0 0
NSSA External-1 0 0
NSSA External-2 0 0
Ospf External-1 0 0
Ospf External-2 0 0
Bgp Internal 0 0
Bgp External 0 0
Ospf Intra-area 0 0
Total 0 0
Supported Releases 10.2.0E or later
412 Layer 3