Connectivity Guide

Example
OS10(config)# evpn
OS10(config-evpn)# evi 10
OS10(config-evpn-evi)# vni 10000
OS10(config-evpn-evi)# rd 111.111.111.111:65535
OS10(config-evpn-evi)# route-target 1:3 both
Supported releases 10.4.2.0 or later
show evpn evi
Displays BGP EVPN routes for host MAC addresses.
Syntax
show evpn evi [id]
Parameters id — (Optional) Enter the EVPN instance ID (1 to 65535).
Default Not congured
Command mode EXEC
Usage information Use the show evpn evi command to verify EVPN instance status, associated VXLAN virtual networks and the
RD and RT values used in BGP EVPN routes in the EVI.
Example
OS10# show evpn evi 1
EVI : 65447, State : up
Bridge-Domain : (Virtual-Network)100, (VNI)100
Route-Distinguisher : 1:110.111.170.102:65447(auto)
Route-Targets : 0:101:16777316(auto) both
Inclusive Multicast : 110.111.170.107
Supported releases 10.4.2.0 or later
show evpn mac
Displays BGP EVPN routes for host MAC addresses.
Syntax
show evpn mac {count | mac-address nn.nn.nn.nn | evi id [mac-address
nn.nn.nn.nn | count | next-hop ip-address count]}
Parameters
• count — Displays the total number of local and remote host MAC addresses in EVPN instances.
• mac-address nn.nn.nn.nn — Displays the BGP EVPN routes for a specic 48-bit host MAC address.
• evi id — Displays the host MAC addresses and next hops in a specied EVPN instance (1 to 65535). To
lter the output, you can display information on the host MAC address count for an EVPN ID or for a next-hop
IP address, and BGP routes for a specied MAC address.
Default Not congured
Command mode EXEC
Usage information Use the show evpn mac command to display the BGP routes for host MAC addresses in EVPN instances.
Examples
OS10# show evpn mac
Type -(lcl): Local (rmt): remote
EVI Mac-Address Type Seq-No Interface/Next-Hop
50 00:00:00:aa:aa:aa rmt 0 55.1.1.3
OS10# show evpn mac count
562 VXLAN