Specifications

Figure 11. Copy needed binaries
2 Check the FPGA region using smarttool –gfr /dev/ttyS0 command.
Figure 12. Check FPGA region
3 Get the current version of the FPGA using the lpctool utility. Get the FPGA running image version through the ./lpctool --
read --addr=0x200 --size=b registers at the LPC tool.
Table 1. SmartFusion FPGA registers
Oset Name Description
0x200 SMF_VER SmartFusion FPGA version register
Figure 13. Get current FPGA version
4 Upgrade the FPGA in smartFusion using the # ./smarttool -uf /dev/ttyS0 <path_to_the_image>/
<platform>_SMF_logic_v0.E.dat command. To upgrade to region A, you must be in region G. The device automatically
reboots after the upgrade.
Dell EMC DAIG-OS tools
75