Users Guide

○ 45 KB (10G)/111 KB (40G) if the queue is priority flow control enabled
○ 2 KB (10G)/8 KB (40G) if the queue is lossy/link-level flow control
○ If this is a priority flow-control queue, this configuration is invalid
○ Only supported for POLICY-MAP-CLASS-MAP (pmap-c-queue) mode
● thresh-mode — (Optional) Buffer threshold mode.
● dynamic thresh-alpha-value — (Optional) Enter the value indexes to calculate the shared
threshold to the enabled dynamic shared buffer threshold, from 0 to 10. Defaults:
○ 0 = 1/128
○ 1 = 1/64
○ 2 = 1/32
○ 3 = 1/16
○ 4 = 1/8
○ 5 = 1/4
○ 6 = 1/2
○ 7 = 1
○ 8 = 2
○ 9 = 4
○ 10 = 8
● static thresh-value — (Optional) Enter the static shared buffer threshold value in Bytes, from
1 to 65535.
Default Not configured
Command Mode POLICY-MAP-CLASS-MAP
Usage
Information
Use the queue-len value parameter to set the minimum guaranteed queue length for a queue. The
no version of this command returns the value to the default.
Example
OS10(config)# policy-map type network-qos nqGlobalpolicy1
OS10(conf-cmap-nqos)# class type network-qos nqclass1
OS10(conf-cmap-nqos-c)# pause buffer-size 45 pause-threshold 30 resume-
threshold 10
OS10(conf-cmap-nqos-c)# queue-limit 150
Example (queue)
OS10(config)# policy-map type queuing pmap1
OS10(config-pmap-queuing)# class cmap1
OS10(config-pmap-c-que)# queue-limit queue-len 100
OS10(config-pmap-c-que)# queue-limit thresh-mode static 50
Supported
Releases
10.3.0E or later
queue bandwidth
Configures a bandwidth for a given queue on interface.
Syntax
queue queue-number bandwidth bandwidth-percentage
Parameters
● queue-number — Enter the queue number.
● bandwidth-percentage — Enter the percentage of bandwidth.
Default Not configured
Command Mode POLICY-MAP-CLASS-MAP
Usage
Information
The no version of this command removes the bandwidth from the queue.
Example None
Supported
Releases
10.4.0E(R1) or later
Quality of service 1371