Users Guide

Table Of Contents
Table 104. Country names and codes (continued)
Country name Country code
Western Sahara ESH
Yemen YEM
Zambia ZMB
Zimbabwe ZWE
SupportAssist commands
eula-consent
Accepts or rejects the SupportAssist end-user license agreement (EULA).
Syntax
eulaconsent {support-assist} {accept | reject}
Parameters
support-assist Enter to accept or reject the EULA for the service.
accept Enter to accept the EULA-consent.
reject Enter to reject EULA-consent.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
If you reject the end-user license agreement, you cannot access the SupportAssist Configuration
submode. If there is an existing SupportAssist configuration, the configuration is removed and the feature
is disabled.
Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S).
Also supported in SmartFabric mode starting in release 10.5.0.1
Example
(Accept)
OS10(config)# eula-consent support-assist accept
Example (Reject)
OS10(config)# eula-consent support-assist reject
This action will disable Support Assist and erase all configured data.Do
you want to proceed ? [Y/N]:Y
Supported
Releases
10.2.0E or later
show eula-consent support-assist
Displays the status of the SupportAssist End User License Agreement, whether it is accepted or rejected.
Syntax
show eula-consent support-assist
Parameters None
Default Rejected
Command Mode EXEC
Usage
Information
Use this command to view the status of the SupportAssist EULA.
Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S).
Also supported in SmartFabric mode starting in release 10.5.0.1
1560 Troubleshoot Dell EMC SmartFabric OS10