Users Guide

Table 10. Option 82 status (continued)
Enable Disable Does not add option 82
information to the packet.
Disable Enable Does not add option 82
information to the packet.
Disable Disable Does not add option 82
information to the packet.
Example
OS10(config)# ip dhcp relay information-option trust-downstream
Supported
Releases
10.2.0E or later
show vlt mismatch
Displays mismatches in a VLT domain configuration.
Syntax
show vlt id mismatch [dhcp-snooping | peer-routing | vlan | vlt-vlan vlt-port-id | virtual-network | | dhcp-
relay]
Parameters
● id — Enter the VLT domain ID, from 1 to 255.
● dhcp-snooping — Display mismatches in a DHCP snooping configuration in a VLT domain.
● peer-routing — Display mismatches in the peer-routing configuration.
● vlan — Display mismatches in a VLAN configuration in the VLT domain.
● vlt-vlan vlt-port-id — Display mismatches in the VLT port configuration, from 1 to 4095.
● virtual-network — Display mismatches in virtual network configurations between VLT peers.
● dhcp-relay — Displays the mismatch (if any) between the VLT peers for DHCP relay options configuration on global level and VLANs spanned
across the VLT peers.
Default Not configured
Command Mode EXEC
Usage
Information
The * in the mismatch output indicates a local node entry.
The show vlt mismatch dhcp-relay command displays the mismatch in the global ip dhcp-relay information-option command.
The show vlt mismatch dhcp-relay command displays the presence or absence of interface level ip dhcp-relay information-option configurations.
Example (no
mismatch)
OS10# show vlt 1 mismatch
Peer-routing mismatch:
No mismatch
VLAN mismatch:
No mismatch
VLT VLAN mismatch:
No mismatch
Example
(mismatch)
OS10# show vlt 1 mismatch
Peer-routing mismatch:
VLT Unit ID Peer-routing
-----------------------------------
* 1 Enabled
2 Disabled
VLAN mismatch:
No mismatch
VLT VLAN mismatch:
228 System management