Users Guide

Installation State: install
--------------------------------------------------
State Detail: In progress: Installing
Task Start: 2019-01-03T17:38:04Z
Task End: 0000-00-00T00:00:00Z
Supported
Releases
10.2.0E or later
show version
Displays software version information.
Syntax
show version
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show version
Network Operating System
OS Version: 10.5.1.0
Build Version: 10.5.1.0.123
Build Time: 2020-02-12T02:34:02+0000
System Type: Z9100-ON
Architecture: x86_64
Up Time: 04:40:37
Supported
Releases
10.2.0E or later
Check OS10 license
To check the status of the pre-installed OS10 license, use the show license status command. A factory-installed OS10
image runs with a perpetual license.
If you pre-order a Dell EMC switch with OS10, you do not need to install a license. If you download OS10 on a trial basis, OS10
comes with a 120-day trial license. Purchase and install a perpetual license after the trial period expires. Once the trial period
expires, the switch generates an error log on the console once every hour as follows:
<165>1 2019-07-22T21:39:53.497121+00:00 OS10 dn_alm 648 - - Node.1-Unit.1:PRI [event],
Dell EMC (OS10) %LADF_LIC_EVAL_PRD_NOTICE: Evaluation license time limit notice.
Evaluation license expired. Please install a valid perpetual license.
For more information, see the Setup Guide that is shipped with your device.
Check license status
OS10# show license status
System Information
---------------------------------------------------------
Vendor Name : DELL EMC
Product Name : S4148F-ON
Hardware Version : X01
Platform Name : x86_64-dell_s4100_c2338-r0
PPID : TW09H9MN282987130026
Service Tag : 9531XC2
Product Base :
Product Serial Number:
40
Getting Started with Dell EMC SmartFabric OS10