Users Guide

Table 30. iDRAC organizationally specific TLVs; Subtypes used in iDRAC custom TLVs (Type – 127, OUI –
0xF8-0xB1-0x56) (continued)
TLV Subtype Description
IOM service tag 9 Service tag ID of the IOM device.
(Applicable only to blade servers.)
IOM model name 10 Model name of the IOM device.
(Applicable only to blade servers.)
IOM slot label 11 Slot label of the IOM device. For
example, A1, B1, A2, and B2 (applicable
only to blade servers).
IOM port number 12 Port number of the NIC. For example, 1,
2, and 3.
Isilon organizationally-specific TLVs
Table 31. Isilon-related TLVs (Type – 127, OUI – 0xF8-0xB1-0x56)
TLV Subtype Description
Subtypes used in LLDP custom TLVs that are transacted by the Isilon nodes
Originator 1 Indicates the Isilon string that is used as
the originator. This string enables the
OS10 switches to identify the Isilon
originated LLDPDUs.
RA prefix 2 Indicates the IPV6 address prefix for
SLAAC. Isilon nodes uses this prefix to
communicate with the master and the
OS10 switch to compute the Virtual IP
address for the specific fabric instance.
The RA prefix is different for each fabric.
Fabric ID 3 Indicates the ID of the fabric the
LLDPDU is originating from.
Isilon-related TLVs – Subtypes used in LLDP custom TLVs that are transacted by the OS10 switches
Originator 1 Indicates the OS10 string that is used as
the originator. The string enables the
OS10 switches to identify LLDPDUs.
Role 2 Following are the applicable roles:
1. LEAF
2. SPINE
3. UNKNOWN
IP address 3 Indicates the IPv6 address of the
originator.
Virtual IP address of the fabric 4 Virtual IP address of the master node.
The Isilon nodes can also use this IPv6
address when needed.
MAC address of the physical interface 5 MAC address used by the OS10 switches
for ND.
Configure LLDP
Enable LLDP globally or on an interface and advertise the TLVs out of an interface.
Layer 2
473