Users Guide

Table Of Contents
Example
OS10# show ipv6 mld snooping interface vlan 3031
Vlan3031 is up, line protocol is up
MLD version is 2
MLD snooping is enabled on interface
MLD snooping query interval is 60 seconds
MLD snooping querier timeout is 130 seconds
MLD snooping last member query response interval is 1000 ms
MLD snooping max response time is 10 seconds
MLD snooping fast-leave is disabled on this interface
MLD snooping querier is disabled on this interface
OS10# show ipv6 mld snooping interface vlan 2
Vlan2 is up, line protocol is up
MLD version is 2
MLD snooping is enabled on interface
MLD snooping query interval is 60 seconds
MLD snooping querier timeout is 130 seconds
MLD snooping last member query response interval is 1000 ms
MLD snooping max response time is 10 seconds
MLD snooping fast-leave is disabled on this interface
MLD snooping querier is disabled on this interface
Multicast flood-restrict is enabled on this interface
Supported
Releases
10.4.1.0 or later
show ipv6 mld snooping mrouter
Displays the details of multicast router ports.
Syntax
show ipv6 mld snooping mrouter [vlan vlan-id]
Parameters vlan-id(Optional) Enter the VLAN ID, ranging from 1 to 4093.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show ipv6 mld snooping mrouter vlan 11
Interface Router Ports
Vlan 11 ethernet 1/1/32
Supported
Releases
10.4.1.0 or later
Protocol Independent Multicast
Protocol independent multicast (PIM) is a group of multicast routing protocols that provides one-to-many and many-to-many
transmission of information. PIM uses routing information from other routing protocols and does not depend on any specific
unicast routing protocol. PIM uses any unicast routing protocol that is deployed in the network. OS10 supports the following PIM
modes:
PIM sparse mode (PIM-SM)
PIM source specific multicast (PIM-SSM)
854
Multicast