API Guide

Dell EMC recommends that you do not enable logging for control plane protocol identical user ACL entry.
DELL EMC recommends a max scale of 128 log-enabled ACL entries. If logging cannot be enabled on further ACL entries, a
syslog error message appears to indicate logging cannot be enabled. However, the ACL entries are applied.
ACL commands
clear ip access-list counters
Clears ACL counters for a specific access-list.
Syntax
clear ip access-list counters [access-list-name]
Parameters access-list-name — (Optional) Enter the name of the IP access-list to clear counters. A maximum
of 140 characters.
Default Not configured
Command Mode EXEC
Usage
Information
If you do not enter an access-list name, all IPv6 access-list counters clear. The counter counts the
number of packets that match each permit or deny statement in an access-list. To get a more recent
count of packets matching an access list, clear the counters to start at zero. To view access-list
information, use the show access-lists command.
Example
OS10# clear ip access-list counters
Supported
Releases
10.2.0E or later
clear ipv6 access-list counters
Clears IPv6 access-list counters for a specific access-list.
Syntax
clear ipv6 access-list counters [access-list-name]
Parameters access-list-name — (Optional) Enter the name of the IPv6 access-list to clear counters. A maximum
of 140 characters.
Default Not configured
Command Mode EXEC
Usage
Information
If you do not enter an access-list name, all IPv6 access-list counters clear. The counter counts the
number of packets that match each permit or deny statement in an access list. To get a more recent
count of packets matching an access list, clear the counters to start at zero. To view access-list
information, use the show access-lists command.
Example
OS10# clear ipv6 access-list counters
Supported
Releases
10.2.0E or later
clear mac access-list counters
Clears counters for a specific or all MAC access lists.
Syntax
clear mac access-list counters [access-list-name]
Parameters access-list-name — (Optional) Enter the name of the MAC access list to clear counters. A
maximum of 140 characters.
1128 Access Control Lists