API Guide

clear qos statistics type
Clears all queue counters, including PFC, for control-plane, qos, and queueing.
Syntax
clear qos statistics type {{qos | queuing | control-plane | buffer-
statistics-tracking} [interface ethernet node/slot/port[:subport]]}
Parameters
● qos—Clears qos type statistics.
● queuing—Clears queueing type statistics.
● control-plane—Clears control-plane type statistics.
● buffer-statistics-tracking—Clears the peak buffer usage count statistics on all interfaces
and service pools.
NOTE: This command does not clear the ingress service-pool statistics on the Z9100-ON
platform.
● interface ethernet node-id/slot/port-id [:subport] — Clears QoS statistics for an
Ethernet interface configured for qos, queuing, or control-plane.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# clear qos statistics type qos interface ethernet 1/1/5
Example
(control-plane)
OS10# clear qos statistics type control-plane interface ethernet 1/1/7
Example
(queuing)
OS10# clear qos statistics type queuing interface ethernet 1/1/2
Example (BST)
OS10# clear qos statistics type buffer-statistics-tracking
Supported
Releases
10.2.0E or later
control-plane
Enters CONTROL-PLANE mode.
Syntax
control-plane
Parameters None
Default Not configured
Command Mode CONTROL-PLANE
Usage
Information
If you attach an access-list to the class-map type of control-plane, the access-list ignores the permit
and deny keywords.
Example (class-
map)
OS10(config)# class-map type control-plane c1
OS10(config-cmap-control-plane)#
Example (policy-
map)
OS10(config)# policy-map type control-plane p1
OS10(config-pmap-control-plane)#
Supported
Releases
10.2.0E or later
1232 Quality of service