API Guide

-- Power Supplies --
PSU-ID Status Type AirFlow Fan Speed(rpm) Status
----------------------------------------------------------------
1 up AC NORMAL 1 13312 up
2 fail
-- Fan Status --
FanTray Status AirFlow Fan Speed(rpm) Status
----------------------------------------------------------------
1 up NORMAL 1 13195 up
2 up NORMAL 1 13151 up
3 up NORMAL 1 13239 up
4 up NORMAL 1 13239 up
Supported
Releases
10.2.0E or later
show version
Displays software version information.
Syntax
show version
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show version
Dell EMC Networking OS10 Enterprise
Copyright (c) 1999-2019 by Dell Inc. All Rights Reserved.
OS Version: 10.5.0.0
Build Version: 10.5.0.270
Build Time: 2019-07-29T23:35:01+0000
System Type: S4148F-ON
Architecture: x86_64
Up Time: 1 day 00:54:13
Supported
Releases
10.2.0E or later
start
Activates Transaction-Based Configuration mode for the active session.
Syntax
start transaction
Parameters transaction - Enables the transaction-based configuration.
Default Not configured
Command Mode EXEC
Usage
Information
Use the start command to save changes to the candidate configuration before applying configuration
changes to the running configuration.
NOTE: Before you start a transaction, you must lock the session using the lock command in EXEC
mode. Otherwise, the configuration changes from other sessions are committed.
92 CLI Basics