Connectivity Guide

MAC PHY Configuration:
Auto-neg supported: 1
Auto-neg enabled: 1
Auto-neg advertised capabilities:
10BASE-T half duplex mode,
10BASE-T full duplex mode,
100BASE-TX half duplex mode,
100BASE-TX full duplex mode
MED Capabilities:
Supported:
LLDP-MED Capabilities,
Network Policy,
Location Identification,
Extended Power via MDI - PSE,
Extended Power via MDI - PD,
Inventory Management
Current:
LLDP-MED Capabilities,
Network Policy,
Location Identification,
Extended Power via MDI - PD,
Inventory Management
Device Class: Endpoint Class 3
Network Policy:
Application: voice, Tag: Tagged, Vlan: 50, L2 Priority: 6, DSCP Value: 46
Inventory Management:
H/W Revision : 12.1.1
F/W Revision : 10.1.9750B
S/W Revision : 10.1.9750B
Serial Number : B11G152
Manufacturer : Dell
Model : S6010-ON
Asset ID : E1001
Power-via-MDI:
Power Type: PD Device
Power Source: Local and PSE
Power Priority: Low
Power required: 6.5
Location Identification:
Civic-based:
2C:02:49:4E:01:02:54:4E:03:07:43:68:65:6E:6E:61:69:04:06:47:75:69:
6E:64:79:05:0B:53:49:44:43:4F:49:6E:64:45:73:74:17:05:4F:54:50:2D:
31
ECS-ELIN:
39:39:36:32:30:33:35:38:32:34
View LLDP neighbors interface
OS10# show lldp neighbors interface ethernet 1/1/1
Loc PortID Rem Host Name Rem Port Id Rem Chassis Id
-----------------------------------------------------------------------
ethernet1/1/1 OS10 ethernet1/1/2 4:17:eb:f7:06:c4
Time to live
The information received from a neighbor expires after a specic amount of time (in seconds) called TTL. The TTL is the LLDPDU transmit
interval (hello) and an integer is called a multiplier. For example, LLDPDU transmit interval (30) times the multiplier (4), (30 x 4 = 120). The
default multiplier is 4, with a default TTL of 120 seconds.
1 Adjust the TTL value in CONFIGURATION mode.
lldp holdtime-multiplier
2 Return to the default multiplier value in CONFIGURATION mode.
no lldp holdtime-multiplier
202
Layer 2