Connectivity Guide

Architecture: x86_64
Up Time: 3 days 00:28:58
Boot system partition
Set the boot partition to active or standby for subsequent boot cycles. Boot OS10 from standby to load the image on the standby partition,
or boot from active to load the currently running image.
1 Display current boot information in EXEC mode.
show boot detail
2 Congure the boot system in EXEC mode.
boot system [active | standby]
• active — Resets the running partition as the subsequent boot partition.
• standby — Sets the standby partition as the subsequent boot partition.
View boot detail
OS10# show boot detail
Current system image information detail:
==========================================
Type: Node-id 1
Boot Type: Flash Boot
Active Partition: B
Active SW Version: 10.4.2.0
Active SW Build Version: 10.4.2.0.226
Active Kernel Version: Linux 4.9.110
Active Build Date/Time: 2018-11-08T13:43:05Z
Standby Partition: A
Standby SW Version: 10.4.2.0
Standby SW Build Version: 10.4.2.0.219
Standby Build Date/Time: 2018-11-03T13:08:46Z
Next-Boot: active[B]
View boot summary
OS10# show boot
Current system image information:
===================================
Type Boot Type Active Standby Next-Boot
-----------------------------------------------------------------------------------
Node-id 1 Flash Boot [B] 10.4.2.0 [A] 10.4.2.0 [B] active
Upgrade commands
boot system
Sets the boot partition to use during the next reboot.
Syntax
boot system {active | standby}
Parameters
• active — Reset the running partition as the next boot partition.
• standby — Set the standby partition as the next boot partition.
Default Active
654 System management