Reference Guide

Command Mode EXEC
Usage Information None
Example
OS10# show ip extcommunity-list
Standard Extended Community List hello
permit RT:1:1
deny SOO:1:4
Supported Releases 10.3.0E or later
show ip prex-list
Displays congured IPv4 or IPv6 prex list information.
Syntax
show {ip | ipv6} prefix-list [prefix-name]
Parameters
• ip | ipv6—(Optional) Displays information related to IPv4 or IPv6.
• prefix-name — Enter a text string for the prex list name. A maximum of 140 characters.
Defaults None
Command Mode EXEC
Usage Information None
Example
OS10# show ip prefix-list
ip prefix-list hello:
seq 10 deny 1.2.3.4/24
seq 20 permit 3.4.4.5/32
Example (IPv6)
OS10# show ipv6 prefix-list
ipv6 prefix-list hello:
seq 10 permit 1::1/64
seq 20 deny 2::2/64
Supported Releases 10.3.0E or later
Route-map commands
continue
Congures the next sequence of the route map.
Syntax
continue seq-number
Parameters seq-number — Enter the next sequence number, from 1 to 65535.
Default Not congured
Command Mode ROUTE-MAP
Usage Information The no version of this command deletes a match.
Access Control Lists 461