Reference Guide

show vlt mac-inconsistency
Displays inconsistencies in dynamic MAC addresses learnt between VLT peers.
Syntax
show vlt mac-inconsistency
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use this command to check mismatch of MAC address table entries between VLT peers. To verify VLT
conguration mismatch issues on peer switches, use the show vlt domain-name mismatch command.
Example
OS10# show vlt-mac-inconsistency
Checking Vlan 228 .. Found 7 inconsistencies .. Progress 100%
VLAN 128
----------
MAC 00:00:00:00:00:02 is missing from Node(s) 2
VLAN 1
----------
MAC 00:a0:c9:00:00:18 is missing from Node(s) 2
MAC 00:a0:c9:00:00:20 is missing from Node(s) 2
VLAN 131
----------
MAC 00:00:00:00:00:02 is missing from Node(s) 2
VLAN 132
----------
MAC 00:00:00:00:00:02 is missing from Node(s) 2
VLAN 135
----------
MAC 00:00:00:00:00:02 is missing from Node(s) 2
VLAN 137
----------
MAC 00:00:00:00:00:02 is missing from Node(s) 2
Run "show vlt d1 mismatch ..." commands to identify configuration issues
Supported Releases 10.2.0E or later
show vlt mismatch
Displays mismatches in a VLT domain conguration.
Syntax
show vlt id mismatch [peer-routing | vlan | vlt-vlan vlt-port-id]
Parameters
• id — Enter the VLT domain ID, from 1 to 255.
• peer-routing — Display mismatches in peer-routing conguration.
• vlan — Display mismatches in VLAN conguration in the VLT domain.
• vlt-vlan vlt-port-id — Display mismatches in VLT port conguration, from 1 to 4095.
Default Not congured
Command Mode EXEC
Usage Information The * in the mismatch output indicates a local node entry.
534 Virtual link trunking