Reference Guide

Supported
Releases
10.3.0E or later
reachability-refresh
Configures a polling interval for reachability tracking.
Syntax
reachability-refresh interval
Parameters interval — Enter the polling interval value (up to 3600 seconds).
Defaults 0 seconds
Command Mode CONFIGURATION
Usage
Information
Set the interval to 0 to disable the refresh.
Example
OS10(conf-track-100)# reachability-refresh 600
Supported
Releases
10.3.0E or later
show track
Displays tracked object information.
Syntax
show track [brief] [object-id] [interface] [ip | ipv6]
Parameters
● brief — (Optional) Displays brief tracked object information.
● object-id — (Optional) Displays the tracked object information for a specific object ID.
● interface — (Optional) Displays all interface object information.
● ip — (Optional) Displays all IPv4 next-hop object information.
● ipv6 — (Optional) Displays all IPv6 next-hop object information.
Defaults None
Command Mode CONFIGURATION
Usage
Information
None
Example (Brief)
OS10# show track brief
TrackID Resource Parameter Status LastChange
--------------------------------------------------------------------------
1 line-protocol ethernet1/1/1 DOWN
2017-02-03T08:41:25Z1
2 ipv4-reachablity 1.1.1.1 DOWN
2017-02-03T08:41:43Z1
3 ipv6-reachablity 10::10 DOWN 2017-02-03T08:41:55Z1
Supported
Releases
10.3.0E or later
track
Configures and manages tracked objects.
Syntax
track object-id
Parameters object-id — Enter the object ID to track (up to 500).
Defaults Not configured
440 Layer 3