Reference Guide

Enter your username and password
%
To delete a login banner and reset it to the Dell EMC default banner, enter the no banner login command. To disable
banner display before login, enter the banner login disable command.
MOTD banner
Configure a message of the day banner that displays after you log in. Enter up to 4096 characters. To start and end the MOTD
banner, enter a single delimiter character or the key combination ^C. You can enter any character as the delimiter.
To enter a MOTD banner text, use the interactive mode. Enter the command with the delimiter character and press Enter. Then
enter each line and press Enter. Complete the banner configuration by entering a line that contains only the delimiter character.
Starting and ending double-quotes are not necessary.
Configure MOTD banner
OS10(config)# banner motd %
DellEMC S4148U-ON
Today's tip: Press tab or spacebar for command completion.
Have a nice day!
%
To delete a MOTD banner and reset it to the Dell EMC default MOTD banner, enter the no banner motd command. To
disable MOTD banner display after login, enter the banner motd disable command.
System banner commands
banner login
Configures a login banner that displays before you log in to the system.
Syntax
banner login delimiter <Enter>
banner-text <Enter>
banner-text <Enter>
... <Enter>
delimiter
Parameters
● delimiter — Enter a single delimiter character or the key combination ^C to specify the start and
end of the text banner.
● banner-text — Enter a maximum of 4096 characters. There is no limit to the number of lines.
Default The Dell EMC default banner is displayed before you log in.
Command Mode CONFIGURATION
Usage
Information
● To enter multiline banner text, use the interactive mode. Enter the command with the delimiter
character and press Enter. Then enter each line and press Enter. Complete the banner configuration
by entering a line that contains only the delimiter character. Starting and ending double-quotes are not
necessary.
● To delete a login banner and reset it to the Dell EMC default banner, enter the no banner login
command. To disable banner display before login, enter the banner login disable command.
Example
OS10(config)# banner login %
Welcome to DellEMC Z9100-ON
Enter your username and password
%
Supported
Releases
10.4.1.0 or later
System management 487