Reference Guide

● match-all — Determines how packets are evaluated when multiple match criteria exist. Enter the
keyword to determine that all packets must meet the match criteria to be assigned to a class.
● match-any — Determines how packets are evaluated when multiple match criteria exist. Enter the
keyword to determine that packets must meet at least one of the match criteria to be assigned to a
class.
● class-map-name — Enter a class-map name (up to 32 characters).
Defaults
● qos — class-map type
● match-any — class-map filter
Command Mode CLASS-MAP-QOS
Usage
Information
Apply match-any or match-all class-map filters to control-plane, qos, and queuing type class-
maps.
Example
OS10(config)# class-map type qos match-all c1
OS10(conf-cmap-qos)#
Command
History
10.2.0E or later
clear interface
Clears the statistics per-port or for all ports.
Syntax
clear interface [interface node/slot/port[:subport]]
Parameters
● interface — (Optional) Enter the interface type.
● node/slot/port[:subport] — (Optional) Enter the port information.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# clear interface ethernet 1/1/1
Supported
Releases
10.3.0E or later
clear qos statistics
Clears all QoS related statistics in the system.
Syntax
clear qos statistics
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# clear qos statistics
Supported
Releases
10.2.0E or later
648 Quality of service