Connectivity Guide

Parameters
vni
Enter the VXLAN ID for a virtual network (1-16,777,215).
Default Not congured
Command mode VIRTUAL-NETWORK
Usage information The vxlan-vni associates a VXLAN ID number with a virtual network. The no version of this command removes
the congured ID.
Example
OS10(conf-vn-100)# vxlan-vni 100
OS10(config-vn-vxlan-vni)#
Supported releases 10.4.2.0 or later
VXLAN MAC commands
clear mac address-table dynamic nve remote-vtep
Clears all MAC addresses learned from a remote VTEP.
Syntax
clear mac address-table dynamic nve remote-vtep ip-address
Parameters
remote-vtep
ip-address
Clear MAC addresses learned from the specied remote VTEP.
Default Not congured
Command mode EXEC
Usage information To display the MAC addresses learned from a remote VTEP, use the show mac address-table nve
remote-vtep command. Use the clear mac address-table dynamic nve remote-vtep command
to delete all MAC address entries learned from a remote VTEP.
Example
OS10# clear mac address-table dynamic nve remote-vtep 32.1.1.1
Supported releases 10.4.2.0 or later
clear mac address-table dynamic virtual-network
Clears MAC addresses learned on all or a specied VXLAN virtual network.
Syntax
clear mac address-table dynamic virtual-network [interface {ethernet node/slot/
port:subport | port-channel number} | local | vn-id [address mac-address |
local]]
Parameters
interface
ethernet node/
slot/
port[:subport]
Clear all MAC addresses learned on the specied interface.
532 VXLAN