Connectivity Guide

show uplink-state-group
Displays the congured uplink-state status.
Syntax
show uplink-state-group [group-id] [detail]
Parameters
• group-id — Enter the uplink group ID. The status of the specied group ID displays.
• detail — Displays detailed information on the status of the uplink-state groups.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show uplink-state-group
Uplink State Group: 9, Status: Enabled,down
OS10# show uplink-state-group 9
Uplink State Group: 9, Status: Enabled,down
OS10#
Example (detail)
OS10# show uplink-state-group detail
(Up): Interface up (Dwn): Interface down (Dis): Interface disabled
Uplink State Group : 1 Status : Enabled,up Name : UFDGROUP1
Defer Time : 10 second(s)
Upstream Interfaces : Eth 1/1/7:1(Up)
Downstream Interfaces: Eth 1/1/1(Dwn) Eth 1/1/2(Dwn) Eth 1/1/3(Dwn) Eth
1/1/4(Dwn)
Eth 1/1/5(Dwn) Eth 1/1/9:2(Dwn) Eth 1/1/9:3(Dwn)
OS10# show uplink-state-group 2 detail
(Up): Interface up (Dwn): Interface down (Dis): Interface disabled
Uplink State Group : 2 Status : Enabled,down Name: UFDGROUP
Upstream Interfaces : Eth 1/1/6(Dwn) Eth 1/1/10(Dwn) Eth 1/1/11(Dwn) Eth
1/1/12(Dwn)
Eth 1/1/13(Dwn) Eth 1/1/14(Dwn) Eth 1/1/15(Dwn)
Downstream Interfaces: Eth 1/1/16(Dis) Eth 1/1/17(Dis) Eth 1/1/18(Dis) Eth
1/1/19(Dis)
Eth 1/1/20(Dis)
Example (detail with
VLTi and VLT status
tracked)
OS10#show uplink-state-group 1 detail
(Up): Interface up (Dwn): Interface down (Dis): Interface disabled (NA): Not
Available
*: VLT port-channel, V: VLT status, P: Peer Operational status ^: Tracking
status
Uplink State Group : 1 Name: iscsi_group, Status: Enabled, Up
Upstream Interfaces : eth1/1/35(Up) *po10(V:Up, ^P:Dwn) VLTi(NA)
Downstream Interfaces : eth1/1/2(Up) *po20(V: Up,P: Up)
OS10#show uplink-state-group 2 detail
(Up): Interface up (Dwn): Interface down (Dis): Interface disabled (NA): Not
868 Uplink Failure Detection