Connectivity Guide

Parameters
• ethernet-interface — Enter the physical Ethernet interface in the format ethernetnode/slot/
port.
• name string — Enter ethernetnode/slot/port to identify the VLTi port on each peer.
• enabled bool — Enter true (no shutdown) to enable the VLTi port; enter false (shutdown) to
disable the VLTi port.
• dell-interface:mode string — Enter MODE_L2DISABLED to disable L2 switching (switchport
mode) on the VLTi port.
Example
curl -X PATCH -k -u admin:admin -H "accept: application/json"
-H "Content-Type: application/json"
"https://10.11.86.113/restconf/data/interfaces/interface=ethernet1%2F1%2F1"
-d '{"interface": [{"name":"ethernet1/1/1", "enabled": "true", "dell-
interface:mode":"MODE_L2DISABLED"}]}'
Congure VLTi interfaces on each peer
RESTCONF
endpoint
/restconf/data/node-topology/1
JSON content
{
"node-topology": [{
"topology-id": 1,
"discovery-interface": ["ethernet1/1/1"],
"topology-type": "VLT",
"dell-vlt:vlt-domain": {}
}]
}
Parameters
• topology-id int — Enter the same VLT domain ID on each peer, from 1 to 255.
• discovery-interface string — Enter ethernetnode/slot/port for the VLTi discovery interface
on each peer.
• topology-type value — Enter VLT for a VLT domain.
Example
curl -X PATCH -k -u admin:admin "https://10.11.86.113/restconf/data/node-
topology/1"
-H "accept: application/json"
-H "Content-Type: application/json"
-d '{"node-topology":[{"topology-id":1, "discovery-interface":
["ethernet1/1/1"], "topology-type":"VLT", "dell-vlt:vlt-domain":{}}]}'
Congure VLT port channel between peers
RESTCONF
endpoint
/restconf/data/interfaces
JSON content
{
"interface": [{
"type": "iana-if-type:ieee8023adLag",
"name": "port-channel10"
}]
}
Parameters
• type string — Enter iana-if-type:ieee8023adLag for a port-channel interface.
• name string — Enter port-channel id-number, where id-number is from 1 to 128.
RESTCONF API 933