Deployment Guide

Figure 7. Centralized Layer3 Gateway Routing
VTEP 1 Leaf Switch
NOTE:
The virtual network interfaces with IP addresses, anycast IP addresses, and anycast gateway MAC addresses
need not be configured in the VTEP 1 and VTEP 2, which are Layer 2 VTEPs.
1. Configure IP switching in the overlay network
Create a tenant VRF
OS10(config)# ip vrf tenant1
OS10(conf-vrf)# exit
Configure an anycast gateway MAC address
OS10(config)# ip virtual-router mac-address 00:01:01:01:01:01
124
BGP EVPN for VXLAN