Connectivity Guide
Supported Releases 10.3.0E or later
show qos ingress buer-statistics-tracking
Displays ingress priority group-level peak buer usage count in bytes for the given priority group on a given interface.
Syntax
show qos ingress buffer-statistics-tracking interface ethernet [node/slot/port]
[priority-group {0-7}] [detail]
Parameters
• node/slot/port—Enter the port information.
• [priority-group {0-7}]—Enter the priority-group keyword, followed by the group number.
• detail—Displays per MMU instance-level statistics in platforms with multiple MMU instances.
Default Not applicable
Command Mode EXEC
Usage Information When BST is enabled, if you make any conguration changes that aect the priority group or priority mapping
conguration, such as removal of class map, addition of class map to policy map (nqos), and so on, be sure to clear
the buer statistics using the clear qos statistics type buffer-statistics-tracking
command to view the actual peak buer utilization for the current conguration.
Example
OS10# show qos ingress buffer-statistics-tracking interface
ethernet 1/1/1 priority-group 0
Supported Releases 10.4.3.0 or later
show qos ingress buer-stats interface
Displays the buers statistics for the ingress interface.
Syntax
show qos ingress buffer-stats interface [interface node/slot/port[:subport]]
Parameters
• interface — (Optional) Enter the interface type.
• node/slot/port[:subport] — (Optional) Enter the port information.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show qos ingress buffer-stats interface ethernet 1/1/1
Interface : ethernet1/1/1
Speed : 0
Priority Used Total Used HDRM
Group buffers buffers
------------------------------------------------
0 0 0
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
1024 Quality of service