Connectivity Guide

• The no version of this command resets the port speed to the default value auto.
Example
OS10(conf-if-ma-1/1/1)# speed auto
Supported Releases 10.3.0E or later
switch-port-prole
Congures a port prole on the switch. The port prole determines the available front-panel ports and breakout modes.
Syntax
switch-port-profile node/unit profile
Parameters
• node/unit — Enter switch information. For a standalone switch, enter 1/1.
• profile — Enter the name of a platform-specic prole.
Default
profile-1
Command Mode CONFIGURATION
Usage Information
• S4148-ON Series port proles:
– profile-1 — SFP+ 10G ports (1-24 and 31-54) and QSFP28 100G ports (25-26 and 29-30) are enabled.
QSFP28 ports support 100GE and 4x10G, 4x25G, and 2x50G breakouts.
– profile-2 — SFP+ 10G ports (1-24 and 31-50), QSFP+ 40G ports (27-28), and QSFP28 ports in 40G
mode (25-26 and 29-30) are enabled.
QSFP+ and QSFP28 ports support 40GE and 4x10G breakouts.
–
profile-3 — SFP+ 10G ports (5-24 and 31-50), QSFP+ 40G ports (27-28), and QSFP28 ports with
40G and 100G capability (25-26 and 29-30) are enabled.
QSFP+ ports support 40GE and 4x10G breakouts. QSFP28 ports support 100GE and 4x25G breakouts
with QSFP28 transceivers, and 40GE and 4x10G breakouts with QSFP+ transceivers.
– profile-4 — SFP+ 10G ports (5-24 and 31-50), QSFP+ 40G ports (27-28), and QSFP28 ports with
40G and 100G capability (25-26 and 29-30) are enabled.
QSFP+ ports support 40GE and 4x10G breakouts. QSFP28 ports support 100GE and 2x50G breakouts
with QSFP28 transceivers, and 40GE and 4x10G breakouts with QSFP+ transceivers.
– profile-5 — SFP+ 10G ports (1-24 and 31-54), QSFP+ 40G ports (27-28), QSFP28 ports with 40G
capability (26 and 30), and QSFP28 ports with 40G and 100G capability (25 and 29) are enabled.
QSFP+ ports support 40GE and 4x10G breakouts. QSFP28 ports 26 and 30 support 40GE and 4x10G
breakouts with QSFP+ transceivers. QSFP28 ports 25 and 29 support 100GE and 4x25G breakouts with
QSFP28 transceivers, and 40GE and 4x10G breakouts with QSFP+ transceivers.
– profile-6 — SFP+ 10G ports (1-24 and 31-54), QSFP+ 40G ports (27-28), QSFP28 ports with 40G
capability (26 and 30), and QSFP28 ports with 40G and 100G capability (25 and 29) are enabled.
QSFP+ ports support 40GE and 4x10G breakouts. QSFP28 ports 26 and 30 support 40GE and 4x10G
breakouts with QSFP+ transceivers. QSFP28 ports 25 and 29 support 100GE and 2x50G breakouts with
QSFP28 transceivers, and 40GE and 4x10G breakouts with QSFP+ transceivers.
• S4148U-ON Port proles:
– profile-1 — SFP+ unied ports (1-24), QSFP28 unied ports (25-26 and 29-30), QSFP+ Ethernet
ports (27-28), and SFP+ Ethernet ports (31-54) are enabled.
◦ SFP+ unied port groups operate in FC mode with 2x16GFC breakouts (ports 1 and 3) by default and
support 4x8GFC. SFP+ unied ports support Ethernet 10GE mode.
◦ QSFP28 unied ports 25 and 29 operate in Ethernet 100GE mode by default, and support 40GE with
QSFP+ transceivers and 4x10G breakouts. QSFP28 ports 25 and 29 support 1x32GFC, 2x16GFC, and
4x8GFC in FC mode.
194
Interfaces