Connectivity Guide
5 Select how to receive the license key — by email or downloaded to your local device.
6 Click Submit to download the License.zip le.
7 Select the Available Downloads tab.
8 Select the OS10 Enterprise Edition release to download, then click Download.
9 Read the Dell End User License Agreement. Scroll to the end of the agreement, then click Yes, I agree.
10 Select how to download the software les, then click Download Now.
11 After you download the OS10 Enterprise Edition image, unpack the .tar le and store the OS10 binary image on a local server. To
unpack the .tar le, follow these guidelines:
• Extract the OS10 binary le from the .tar le. For example, to unpack a .tar le on a Linux server or from the ONIE prompt, enter:
tar -xf tar_filename
• Generate a checksum for the downloaded OS10 binary image by running the md5sum command on the image le. Ensure that the
generated checksum matches the checksum extracted from the .tar le.
md5sum image_filename
• Copy the OS10 image le to a local server using the copy command.
To install an OS10 Enterprise Edition image and license, see Installation using ONIE and Install OS10 license.
Download an image for OS10 upgrade
To upgrade an existing OS10 image, download a new OS10 Enterprise Edition image from DDL.
1 Sign into DDL using your account credentials.
2 Locate the entry for your entitlement ID and order number, then select the product name.
3 Select the Available Downloads tab on the Product page.
4 Select the OS10 Enterprise Edition image to download, then click Download.
5 Read the Dell End User License Agreement, then scroll to the end of the agreement and click Yes, I agree.
6 Select how to download the software les, then click Download Now.
7 After you download the OS10 Enterprise Edition image, unpack the .tar le and store the OS10 binary image on a local server. To
unpack the .tar le, follow these guidelines:
• Extract the OS10 binary le from the .tar le. For example, to unpack a .tar le on a Linux server or from the ONIE prompt, enter:
tar -xf tar_filename
• Generate a checksum for the downloaded OS10 binary image by running the md5sum command on the image le. Ensure that the
generated checksum matches the checksum extracted from the .tar le.
md5sum image_filename
8 Copy the OS10 image le to a local server using the copy command.
To upgrade OS10, follow the procedure in OS10 upgrade.
RMA replacement
A replacement switch comes without an OS or license installed. If you receive a replacement switch, you must assign the STAG of the
replacement switch to the SW entitlement in DDL and install the OS10 software and license.
To download OS10 Enterprise Edition and the license, follow the steps for an ONIE switch without an OS installed. For complete installation
and license information, see Installation and Install OS10 license.
Installation using ONIE
CAUTION
: Following the procedure laid out in this section, will lead to wiping out of all congurations present on the switch.
If you purchase an ONIE-only switch or if you want to replace an existing OS, you can install an OS10 software image using ONIE-based
auto-discovery or a manual installation:
Getting Started
31