Connectivity Guide

Vlan128
default Mgmt1/1/1
Vlan1,24-25,200
green Eth1/1/7
Vlan256
orange Eth1/1/6
Vlan192
OS10# show ip route vrf blue
Codes: C - connected
S - static
B - BGP, IN - internal BGP, EX - external BGP
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, * - candidate default,
+ - summary route, > - non-active route
Gateway of last resort is not set
Destination Gateway Dist/Metric Last Change
-------------------------------------------------------------------------------
C 21.0.0.0/24 via 21.0.0.1 ethernet1/1/5 0/0 02:05:00
OS10# show ip route vrf orange
Codes: C - connected
S - static
B - BGP, IN - internal BGP, EX - external BGP
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, * - candidate default,
+ - summary route, > - non-active route
Gateway of last resort is not set
Destination Gateway Dist/Metric Last Change
--------------------------------------------------------------------------------
C 31.0.0.0/24 via 31.0.0.1 ethernet1/1/6 0/0 02:09:19
OS10# show ip route vrf green
Codes: C - connected
S - static
B - BGP, IN - internal BGP, EX - external BGP
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, * - candidate default,
+ - summary route, > - non-active route
Gateway of last resort is not set
Destination Gateway Dist/Metric Last Change
---------------------------------------------------------------------------------
C 41.0.0.0/24 via 41.0.0.1 ethernet1/1/7 0/0 02:45:16
=================================================================================
View VRF instance information
To display information about a VRF conguration, use the show ip vrf command. To display information on all VRF instances including
the default VRF 0, do not enter a value for vrf-name.
• Display the VRF instance interfaces.
EXEC
show ip vrf [vrf-name]
Layer 3
395