Connectivity Guide
• vrf vrf-name — (Optional) Enter the keyword vrf followed by the name of the VRF to clear OSPFv3
processes in that VRF.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# clear ipv6 ospf 3 process
Supported Releases 10.3.0E or later
clear ipv6 ospf statistics
Clears OSPFv3 trac statistics.
Syntax
clear ipv6 ospf [instance-number] [vrf vrf-name] statistics
Parameters
• instance-number — (Optional) Enter an OSPFv3 instance number, from 1 to 65535.
• vrf vrf-name — (Optional) Enter the keyword vrf followed by the name of the VRF to clear OSPFv3
statistics in that VRF.
Default Not congured
Command Mode EXEC
Usage Information This command clears the OSPFv3 trac statistics in a specied instance or in all the congured OSPFv3
instances, and resets them to zero.
Example
OS10# clear ipv6 ospf 100 statistics
Supported Releases 10.4.0E(R1) or later
default-information originate
Generates and distributes a default external route information to the OSPFv3 routing domain.
Syntax
default-information originate [always]
Parameters always — (Optional) Always advertise the default route.
Defaults Disabled
Command Mode ROUTER-OSPFv3
Usage Information The no version of this command disables the distribution of default route.
Example
OS10(config)# router ospfv3 100
OS10(config-router-ospfv3-100)# default-information originate always
Supported Releases 10.3.0E or later
ipv6 ospf area
Attaches an interface to an OSPF area.
Syntax
ipv6 ospf process-id area area-id
Layer 3 577