Connectivity Guide
Parameters
ethernet node/
slot/
port[:subport]
Assign the specied interface to a virtual network.
port-channel
number
Assign the specied port channel to a virtual network.
untagged
Assign untagged trac on an interface or port channel to a virtual network.
vlan-tag vlan-
id
Assign tagged trac on the specied VLAN to a virtual network.
Default Not congured
Command mode VIRTUAL-NETWORK
Usage information Use this command to assign trac on the same VLAN or interface to dierent virtual networks. The no version of
this command removes the congured value.
Example
OS10(config)# virtual-network 10000
OS10(config-vn)# member-interface port-channel 10 vlan-tag 200
OS10(config-vn)# member-interface port-channel 20 untagged
Supported releases 10.4.2.0 or later
nve
Enters network virtualization edge (NVE) conguration mode to congure the source VXLAN tunnel endpoint.
Syntax
nve
Parameters None
Default None
Command mode CONFIGURATION
Usage information In NVE mode, congure the source tunnel endpoint for all virtual networks on the switch.
Example
OS10# nve
OS10(config-nve)#
Supported releases 10.4.2.0 or later
remote-vtep
Congures the IP address of a remote tunnel endpoint in a VXLAN network.
Syntax
remote-vtep ip-address
Parameters ip-address — Enter the IP address of a remote virtual tunnel endpoint (VTEP).
Default Not congured
Command mode VIRTUAL-NETWORK VXLAN-VNI
696 VXLAN