Connectivity Guide

show virtual-network vlan
Displays the VXLAN virtual networks where a VLAN is assigned.
Syntax
show virtual-network vlan vlan-id
Parameters
vlan vlan-id
Enter a VLAN ID, from 1 to 4093.
Default Not congured
Command mode EXEC
Usage information Use this command to verify the VXLAN virtual networks where a VLAN is assigned, including the port members
connected to downstream servers.
Example
OS10# show show virtual-network 100
Vlan Virtual-network Interface
100 1000 ethernet1/1/1,ethernet1/1/2
Supported releases 10.4.2.0 or later
show vlan (virtual network)
Displays the VLANs assigned to virtual networks.
Syntax
show vlan
Parameters None
Default Not congured
Command mode EXEC
Usage information Use this command to display the VLAN port interfaces that transmit VXLAN packets over a virtual network.
Example
OS10# show vlan
Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs,
@ – Attached to Virtual Network
Q: A - Access (Untagged), T - Tagged
NUM Status Description Q Ports
* 1 up A Eth1/1/1-1/1/48
@ 100 up T Eth1/1/2,Eth1/1/3
A Eth1/1/1
@ 101 up T port-channel5
200 up T Eth1/1/11-1/1/15
Supported releases 10.4.2.0 or later
source-interface loopback
Congures a dedicated Loopback interface as the source VTEP.
Syntax
source-interface loopback number
702 VXLAN