Connectivity Guide

Example: VXLAN with static VTEP
This example uses a typical Clos leaf-spine topology with static VXLAN tunnel endpoints (VTEPs) in VLT dual-homing domains. The
individual switch conguration shows how to set up an end-to-end VXLAN. The underlay IP network routes advertise using OSPF.
• On VTEPs 1 and 2, access ports are assigned to the virtual network using a switch-scoped VLAN conguration.
• On VTEPs 3 and 4, access ports are assigned to the virtual network using a port-scoped VLAN conguration.
• Overlay routing between hosts in dierent IP subnets is congured on the VTEPs.
Figure 9. Static VXLAN use case
710
VXLAN