Connectivity Guide
disable
Lowers the privilege level.
Syntax
disable privilege-level
Parameters
• privilege-level—Enter the privilege level, from 0 to 15.
Defaults 1
Command Mode Privileged EXEC
Usage Information
If you do not specify a privilege level, the system assigns level 1.
Example
OS10# disable
OS10# disable 6
Supported Releases 10.4.3.0 or later
enable
Enables a specic privilege level.
Syntax
enable privilege-level
Parameters
• privilege-level—Enter the congured privilege level, from 0 to 15.
Defaults 15
Command Mode Exec
Usage Information
Dell EMC Networking recommends conguring a password for privilege level 15 using the enable password
command. If you do not congure a password for a level, you can switch to that level without entering a password,
unless a password is congured for a highest intermediate level. If you congure a password for an intermediate
level, enter that password when prompted. To access privilege level 15, you must congure the enable
password
command. If you do not congure a password for privilege level 15, you cannot enter level 15. For
privilege levels 0 to 14, the enable password command is optional.
Privilege levels inherit all permitted commands from all lower levels. For example, if you log in to privilege level 10
using the enable 10 command, all commands that are assigned to privilege level 10 and lower are available for
use.
Example
OS10# enable
OS10# enable 10
Supported Releases 10.4.3.0 or later
804 Security