Connectivity Guide
Example
OS10(conf-pmap-que)# bandwidth percent 70
Supported Releases 10.2.0E or later
buer-statistics-tracking
Enables or disables buer statistics tracking feature globally.
Syntax
buffer-statistics-tracking
Parameters None
Default Disabled
Command Mode SYSTEM-QOS
Usage Information The no form of the command disables buer statistics tracking feature globally. After you disable BST, be sure to
clear the counter using the clear qos statistics type buffer-statistics-tracking command.
Example
OS10# configure terminal
OS10(config)# system qos
OS10(config-sys-qos)# buffer-statistics-tracking
Supported Releases 10.4.3.0 or later
class
Creates a QoS class for a type of policy-map.
Syntax
class class—name
Parameters class-name — Enter a name for the class-map. A maximum of 32 characters.
Default Not congured
Command Mode
POLICY-MAP-QUEUEING
POLICY-MAP-QOS
POLICY-MAP-NQOS
POLICY-MAP-CP
POLICY-MAP-APPLICATION
Usage Information If you dene a class-map under a policy-map, the qos, queuing, or control-plane type is the same as the
policy-map. You must create this map in advance. The only exception to this rule is when the policy-map type is
trust, where the class type must be qos.
Example
OS10(conf-pmap-qos)# class c1
Supported Releases 10.2.0E or later
996 Quality of service