Connectivity Guide

Eth 1/1/26 up 40G A 1 -
Eth 1/1/27 up 40G A 1 -
Eth 1/1/28 up 40G A 1 -
Eth 1/1/29 up 40G A 1 -
Eth 1/1/30 up 40G A 1 -
Eth 1/1/31 up 40G A 1 -
Eth 1/1/32 up 40G A 1 -
--------------------------------------------------------------------------------
View alias output for goint
OS10(config)# goint 1/1/1
OS10(conf-if-eth1/1/1)#
View alias information
OS10# show alias
Name Type
---- ----
govlt Config
goint Config
shconfig Local
showint Local
shver Local
Number of config aliases : 2
Number of local aliases : 3
View alias information brief. Displays the rst 10 characters of the alias value.
OS10# show alias brief
Name Type Value
---- ---- -----
govlt Config "vlt-domain..."
goint Config "interface ..."
shconfig Local "show runni..."
showint Local "show inter..."
shver Local "show versi..."
Number of config aliases : 2
Number of local aliases : 3
View alias information in detail. Displays the entire alias value.
OS10# show alias detail
Name Type Value
---- ---- -----
govlt Config "vlt-domain $1"
goint Config "interface ethernet $1"
shconfig Local "show running-configuration"
showint Local "show interface $*"
shver Local "show version"
Number of config aliases : 2
Number of local aliases : 3
Delete alias
OS10# no alias showint
OS10(config)# no alias goint
Multi-line alias
You can create a multi-line alias where you save a series of multiple commands in an alias. Multi-line alias is supported only in the
Conguration mode.
52
Getting Started