Users Guide

22 Dell EMC Networking ONIE Quick Start Guide
root@dellemc-diag-os:~# cpldupgradetool --write --image=s41x8_1.1_1.0_0.7.vme
9.6 EDA-DIAG SMF-MSS upgrade
The SmartFusion-Microcontroller Subsystem (SMF-MSS) can be verified or upgraded from the EDA-DIAG,
however, each switch may have a specific procedure for this update.
Note: See the Hardware Diagnostic Guide specific to your switch, to update the SMF-MSS.
A switch that does not have an SMF-MSS image will not have the smarttool command available for use.
To verify the SMF-MSS version, enter the following command:
root@dell-diag-os:~# smarttool -gmv /dev/ttyS0
MSS image version is - V2.4
9.7 Exit EDA-DIAG
To exit back to the ONIE menu, run the following command:
root@dellemc-diag-os:~# reboot