Users Guide

26 Dell EMC Networking ONIE Quick Start Guide
Info: Fetching tftp://100.67.2.65/INSTALLER-DND-SK-1.0.0.14.bin ...
random: nonblocking pool is initialized
INSTALLER-DND-SK-1.0 100% |*******************************| 27143k
0:00:00 ETA
ONIE: Executing installer: tftp://100.67.2.65/INSTALLER-DND-SK-
1.0.0.14.bin
Verifying image checksum ... OK.
Preparing image archive from /var/tmp/installer ... Done.
Mounting /dev/sda3...mkfs.fat 3.0.26 (2014-03-07)
Done.
Copying Images ...Done.
Installing Menu Entry ...Done
All Done
ONIE: NOS install successfull: tftp://100.67.2.65/INSTALLER-DND-SK-
1.0.0.14.bin
ONIE: Rebooting...
B.2 Hardware diagnostics
To run hardware diagnostics, enter the testall command.
DCLI-> testall
Dell Networking OS S4048-ON BOARD DIAGNOSTIC [0]
:
B.3 DCLI BIOS upgrade
DCLI does not support BIOS image upgrades. Return to ONIE: Rescue mode to upgrade the BIOS.
B.4 DCLI CPLD upgrade
From the DLCI prompt:
1. Enter the upgradeCPLDImage command to start the CPLD upgrade:
DCLI-> upgradeCPLDImage
Upgrade CPLD Image [YES/NO]: YES
WARNING: Please do not POWERCYCLE or POWER OFF the system!
CPLD upgrade started ... (May take upto 10 minutes!) yes
CPLD Upgrade done, comment = Diamond Deployment Tool 3.7
CREATION DATE: Fri Sep 23 09:09:14 2016
2. When the upgrade is done, manually power-cycle the switch using the powercycle command.
DCLI-> powercycle
Power cycling the device ...