Users Guide

VLT Unit ID Option-82 Link-Selection Server-Override VSS
----------------------------------------------------------------------------------------
* 1 Enabled - - -
2 Disabled - - -
Interface Relay Configuration Mismatch
--------------------------------------------------------------------
Interface: virtual-network10000
VLT Unit ID Option-82 Server-Override VSS Source-Interface
-----------------------------------------------------------------------------------------------------------
* 1 Disabled - -
-
2 Enabled - -
-
OS10#
Supported
Releases
10.2.0E or later
show vlt role
Displays the VLT role of the local peer.
Syntax
show vlt id role
Parameters id — Enter the VLT domain ID, from 1 to 255.
Default Not configured
Command Mode EXEC
Usage
Information
The * in the mismatch output indicates a local mismatch.
Example
OS10# show vlt 1 role
VLT Unit ID Role
------------------------
* 1 primary
2 secondary
Supported
Releases
10.2.0E or later
show vlt vlt-port-detail
Displays detailed status information about the VLT ports.
Syntax
show vlt id vlt-port-detail
Parameters id — Enter a VLT domain ID, from 1 to 255.
Default Not configured
Command Mode EXEC
Usage
Information
The * in the mismatch output indicates a local mismatch.
Example
OS10# show vlt 1 vlt-port-detail
Vlt-port-channel ID : 1
VLT Unit ID Port-Channel Status Configured ports Active ports
---------------------------------------------------------------------
* 1 port-channel1 down 2 0
2 port-channel1 down 2 0
VLT ID : 2
1426 Virtual Link Trunking