Users Guide

Examples
OS10(conf-support-assist)# source-interface ethernet 1/1/4
OS10(conf-support-assist)# source-interface loopback 1
OS10(conf-support-assist)# source-interface mgmt 1/1/1
OS10(conf-support-assist)# source-interface port-channel 10
OS10(conf-support-assist)# source-interface vlan 100
Supported
Releases
10.4.0E(R1) or later
SupportAssist company commands
address
Configures the company address.
Syntax
address city name state name country name zipcode number
Parameters
● city name—Enter the keyword and the city name.
● state name—Enter the keyword and the state name.
● country name—Enter the keyword and the country code.
● zipcode number—Enter the keyword and the zip code.
Default Not configured
Command Mode SUPPORT-ASSIST contact company sub-mode
Usage
Information
Enter ? to view a list of supported country names and codes. You can also find this information at the
following location: Country names and codes.
Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0(R3S).
Also supported in SmartFabric mode starting in release 10.5.0.
The no version of this command removes the configuration.
Example
OS10(conf-support-assist-ExampleCompanyName)# address city SanJose state
California country USA zipcode 95123
Supported
Releases
10.2.0E or later
contact-person
Configures the contact name for an individual.
Syntax
contact-person {first firstname last lastname}
Parameters
● first firstname — Enter the keyword and the first name of the contact person. Use double
quotes for more than one first name.
● last lastname — Enter the keyword and the last name of the contact person.
Default Not configured
Command Mode SUPPORT-ASSIST
Usage
Information
Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0(R3S).
Also supported in SmartFabric mode starting in release 10.5.0.
Troubleshoot Dell EMC SmartFabric OS10 1561